Went to carnage sunday had a group of 12 had a good time up there. I layed the rubi on its sidegoing up the water fall. then there was a broken tie rod on a tj. lwb rubi bent a tie rod. And a cj broke a front drive shaft and shackle on the front. I am waiting for the pics there should be a video as well. Thanks to every one that helped roll me back over. See everyone next time.
So no real carnage? Damn had quite a bit break there...
'04 WJ 4.0L @ 6" on Clayton LA's & 35" BFG MT KM2's - [center][url=www.rockfrogs.org][COLOR=DarkGreen][B]Rock Frogs![/B][/COLOR][/url] - [url=http://www.treadlightly.org][COLOR="DarkGreen"][B]Tread Lightly[/B][/COLOR][/url] - [url=http://www.staythetrail.org][COLOR="DarkGreen"][B]Stay The Trail[/B][/COLOR][/url][/center]
got any pics of my stock nissan in there?
Th eonly pics I have are of steven's flop and My cameras not uploading for some reason. I had a great time this trip I'll try to get the pics to you steven. See you next time all. And hey nissan Good Effort for a stocker!
yeah im thinkin thats prolly the bravest ive been in a long time getting that far up there.
wait till i get the 3 inch lift and 3 inch body lift done! im also thinking about later on if i dont get a jeep, im gonna get a solid axle for it.. im told early 80's late 70's toyotas fit with not too much of a problem
That flop was priceless. I hope we got a pic of your face!
yup there was lots of carnage that day and for once none of it was mine though I did find that I broke the rubber off in my drivers side motor mount but that was an easy fix.
So this baby seal walks into this club...
Lunatic #9.
كافر
I've got pics of the flop and a recovery I had to do on the way down lefthand. I still cant figure out how to post them so I'll email to anyone who can. Any takers?
Last edited by mudthug; April 14th, 2006 at 11:28 AM.
Sounds like a great time... cant wait for the pics!!
[COLOR=DarkRed][B]Kev - Alpine Spirit[COLOR=Black] - 2002 X, Chopped, Swapped and Locked[/COLOR][/B][/COLOR]
[URL="http://jeffreal.com"]Mtn Real Estate [/URL]
shoot em over to me and I'll post em up. jtw22(nospam)@comcast.netOriginally Posted by mudthug
take off the (nospam) of course.
I sent them hopefully you get 'em. That was a fun trip but that recovery sucked. the guy slid off when he started sliding off some sand stone and in stead of stopping he just hopped himself off the cliff. He was in 2 wheel drive w/ bald tires. A sure future Darwin Award winner. The only carnage I ended up with besides the usual skid plate and bumper rash was losing a hitch pin and washer for my swaybar but a small screwdriver ans some old duct tape got me back to denver no problem.
Last edited by mudthug; April 14th, 2006 at 03:24 PM.
got em. Let's try this first then I'll do other stuff if I need to.
http://pg.photos.yahoo.com/ph/rednec...yertEBEZ6rG4e0
link worked for me. is it workin' for everyone else?
yup
79 CJ7 37's 4.88's Locked
considering he flopped there wasn't much damage at all!
Note: My camera is fixed-focus, apparently set on "fuzzy".
Sorry I was sort of a poor sport. I've always wheeled alone, very cautiously, but keeping up some progress to keep my son
happy - when Jason's not happy, nobody's happy... indeed, the screaming is unendurable. If you've ever been present at an inhumanely-performed slaughter of a hog, you have a small sample - now, picture that sound coming from the person you love the most, for hours on end, while people look at you like you're hurting him. So, I get sort of frantic when stuck in traffic. A large group of hardcore wheelers (apparently with enough money to set out to break stuff), each spending half an hour on each obstacle, got me kind of impatient, and I tried to hold a smooth steady line through everything, as if I were driving Johnny Park, despite the alarming sounds from underneath.
...The only thing I'll have to replace soon is the DF LCA - I torqued it so badly the front bushings are in oval-shaped holes. The bent tie rod is not enough to even offcenter the wheel. I just put in a new grease zerk at the pitman arm ball joint. The body damage in front of the PR wheelwell isn't readily noticable... that diamond-plate rocker panel stuff did its job, but I've got to put some rails out there before I risk them again.
Pics:
The ballsiest truck on carnage that day -
Putting Steven back on his wheels, image and movie -
http://ni0h.mesanetworks.net/redrubirighting.mov
haha! thats awsome! thanks for the pic of my truck!
im gonna lift the suspension 3 inches along with a 3 inch body lift so i can get bigger tires.. just got a new job today working at drivetrain industries and im told they can make me a locker and bigger driveshafts for the front!
look out carnage the nissan is coming!
Posting Permissions
