Results 1 to 1 of 1
  1. #1
    Wally's Avatar
    Join Date
    Jan 2003
    Location
    Snowmass Village / Grand Junction, CO
    Member #
    1668
    Images
    30

    Wally Sheata's 91 One Ton YJ

    91 YJ with 4.0L High Output, all that's left is the tub, frame and Motor with the following specs.

    Driveline:
    - Chevy Dana 60 front, 5.86's and Detroit,35 spline inner and spicer 35 spline outter, Tera hubs.
    - Dodge Dana 70 FF Rear, 5.86's, Detroit, Stock 1.5" 35 spline shafts
    -Tom woods 1310 shafts front and rear with 12" slip on the front shaft.
    - NV4500 Tranny with 5.61 First gear, .73:1 5th
    - Dana 300, Currie Twin Stick, Tera 4:1
    - 39.5x15-17 Super Swamper TSL on USA6x6 17x11 Double Beadlocks

    Suspension:
    - Custom Shackle Reversal up front.
    - Custom Alcan's with Military Wrap and Torque leaf front/rear SOA for total wheel base of 106" with new rear frame section and spring mounts. 20.5x26.5 front...22.5x24.5 rear
    - 14" Travel Bilstiene 5100's

    Misc:
    - M.O.R.E. 1" Body Lift to clear the NV4500
    - Custom 3/16" Steel Boat Sides
    - Custom Belly and gas skid made of 3/16" steel
    - Front hoop bent from Structural Pipe.
    - Custom Front and Rear Bumpers w/Tire Carrier, rear bumper welded to the frame for added strength
    - Warn xd9000i Winch with 48" highlift ontop

    The day i picked her up fall 2003


    4 days later with 4" lift, 33's, 8.8 rear, 4.10's, with detroits f/r


    Winter 2004 1 ton swap with the 37x12.5-17 BFG Muds, NV4500 & Dana 300






    Summer/Winter 2005 (38.5"x14.5-15 TSL SX's & 100" wheel base)




    Spring 2006 (39.5x15-17 TSL's & 106" Wheel base)
    Next to the wifes YJ on 35's





    Last edited by Wally; April 8th, 2008 at 08:41 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •