PDA

View Full Version : Tj Aussie Locker



luigi0523
July 10th, 2006, 01:52 PM
I installed an Aussie Locker 3 months ago and by now I have put it to work many times and I'm VERY happy to report, IT WORKS GREAT. The Aussie was easy to install and the price was right. If anyone out there is thinking about an Auto Locker, GO FOR an Aussie, I'm happy with my choice!:)

joshcom3000
December 21st, 2006, 06:44 PM
x2

TracYJ
December 21st, 2006, 08:52 PM
x2

Mine's in a YJ, and not to be redundant, but x3.

97TJeep
January 11th, 2007, 09:35 PM
Been rockin them front and rear (30 and 44) in my TJ since each model came out 2 and 3 years ago. They have both loosened up alittle over that time but are still working great. By far the best bang for the buck over any other locker out there.

-Michael

JeeperJohn
January 11th, 2007, 10:13 PM
how do thoes things do in the snow?
Are you guys running them in your daily drivers?

97TJeep
January 11th, 2007, 10:27 PM
A locker is a locker in the snow, their alittle sketch at first but you learn to drive with them no prob. I DD mine up untill a year ago locked up. You definantly know their there but like I said you learn to live with them, not a big deal.

-Michael

SmellHole
January 18th, 2007, 06:40 AM
Mine was great too. :crybaby: But it broke on only the 5th wheeling trip. Granted, I was trying to pull another jeep up a muddy hill and I slid into small ravine and then POW! No workie....

newracer
January 18th, 2007, 12:35 PM
My neighbor just bought one for his TJ and I'll be helping him install it. Anything I should know about the install?

joshcom3000
January 18th, 2007, 03:27 PM
easy install, did it by myself in about 5 hours (moving slowly) works great and since i only have it in the front it only engages when in 4wd, though with this snow i used 4wd on the paved road and noticed it tends to jerk the wheel abit when driving faster(kinda scary until you get used to it) but overall great locker

luigi0523
January 21st, 2007, 08:58 AM
X2 on easy installation! On pavement with snow there's a bit of a learning curve, seems throttle control is the key. :thumbsup:

TJay
January 24th, 2007, 12:28 PM
Got one on order for my rear 44. I'm doing gears at the same time so I bet the installation should be a snap.