10% off your repair bill @ Astro Automotive

[AstroAuto]

That's right!
Astro Automotive offers 10% off* your bill if you are a Colorado4x4.org member!**
Astro is a full service independent repair facility for all your 2WD, AWD and 4WD domestic and imported vehicles
All alignments are done on premises. 2wheel, 4wheel and thrust angle alignments available, up to 37" tires accommodated
9 bays and 4 ASE certified mechanics
Hours are 7:30 am to 5:30 pm with a drop box for early or late drop off
Astro has 100% repair effectiveness for emission failure repairs!Astro Automotive is centrally located at 65 S. Cherokee St...3 blocks west of Broadway and 3 blocks north of Alameda ave.

Give us a call at 303-722-2808 and talk to Bruce or Brian for an appointment http://colorado4x4.org/vbb/images/smilies/smile.gif

* Sorry, no discounts on shipping charges, special order parts, sublet items or dealer obtained parts.
** Proof of membership may be required at time of payment.

[Rick]

Is anybody out there?

Yup! Good work on my Jeep you guys did... and thanks for the ride! :thumbsup:

[1BGDOG]

Jerry

Thanks again for taking care of my sales guy, Bryan. He was super psyched to save some serious coin. and I am glad to know that his car is good to go. nice meeting you last week.

[Snotty]

Do you guys do brake work? 99TJ

Replace master cylinder/proportioning valve/fix my messed up e-brake?

[D-MASTER]

Do you guys do brake work? 99TJ

Replace master cylinder/proportioning valve/fix my messed up e-brake?

Sure bring it down or call Bruce @ 303-722-2808

[ColoJeeper]

Thanks again guys for a great job done on both my van and pickup. Doing business with you all is a pleasure.

Don

[bigkuh]

:thumbsup: These guys did some front end work on my dd, a 93 toyota camry. It runs great guys! Thanks for the courteous and fast service, and for a fair price as well!! Highly reccomended shop I say. :D
Andy

[Jerry]

Thanks andy anytime.:flipoff2:

[ni0h]

Jerry: Do you diagnose DW? I've gotten rid of all improper movement that I can detect, just had the tires rebalanced, and it keeps getting worse.
components participating in the DW:
2005 LJ Rubi
33x9.5-15 on used centerlines
3.5" RE SA valueflex
procomp adj TB(needed it in a big hurry when I couldn't drill the TB reloc)
T&T tierod.

This seems to have gone beyond my ability to detect looseness. If it is in the scope of your shop's work, I'll give more details, and if you're still willing, I'll try to limp it down there.

[D-MASTER]

Jerry: Do you diagnose DW? I've gotten rid of all improper movement that I can detect, just had the tires rebalanced, and it keeps getting worse.
components participating in the DW:
2005 LJ Rubi
33x9.5-15 on used centerlines
3.5" RE SA valueflex
procomp adj TB(needed it in a big hurry when I couldn't drill the TB reloc)
T&T tierod.

This seems to have gone beyond my ability to detect looseness. If it is in the scope of your shop's work, I'll give more details, and if you're still willing, I'll try to limp it down there.

Have you had it aligned since the lift?
We can take a look and see. Bring it down or call if you plan on waiting while we work. 303-722-2808

[ni0h]

will call.

[Tiffany]

Hey guys....Can you get me a quote on an alignment for the Expy?

2000 Eddie Bauer Expedition
Pulls hard to the right

You can PM if you would like :)

[RedRuby]

Can you guys PM me the cost to do a set of ball joints (all 4) parts and labor, for a dana 30 axle? XJ Jeep. Thanks

[cheftyler]

I'd like to get an estimate on an alignment for a 1995 Chevy Silverado Z71 short bed.
Do you guys do body work? My wife's '02 Mazda protege got a large dent on the drivers side right in front of the taillight...if not, can I get a reco on a good body shop?

Thanks

[D-MASTER]

I'd like to get an estimate on an alignment for a 1995 Chevy Silverado Z71 short bed.
Do you guys do body work? My wife's '02 Mazda protege got a large dent on the drivers side right in front of the taillight...if not, can I get a reco on a good body shop?

Thanks

The alinment is 54.50 as long as the chevy is stock. We do body work, but i don't think you would be happy with my work. So i am suggesting Snyder auto body. He is on 12th and Sante Fe ave. When i get to work i will get you a phone number.

[cheftyler]

Thanks, D-Master. The Chevy is all stock I'll give you a shout next week some time when I can figure out when I am available.

[tjmaxx]

My thanks to Astro Automotive and Dave B. for the alignment on my TJ. The price was great and the 10% discount was icing on the cake. I had just put on an OME lift, along with some new 33s and had some used RE control arms I had installed last fall. I couldn't budge one of the rear upper control arms (even pulled the top off my puny workbench trying to turn the control arm with one end in the vise). Dave B. spent 2 hours plus on the alignment and freeing the control arm so the rear pinion angle could be adjusted. No more vibes!

And for the record I bring the suck trying to set caster using an angle finder and setting toe-in using a tape measure. I was so far off I was ashamed when Dave put it on the machine.

It's refreshing to see that the old-fashioned, do-it-all garage with reasonable prices still exists. Thanks Dave!

[Jerry]

Any time maxx, just give us a call.

[fpkites]

See you on Friday at 8:15 Jerry

[Jerry]

Sounds good jim, see you then. jerry

[fpkites]

Yet another kudos for Astro! Thanks for the fast and thorough service guys. Nice to find a shop that's 4x4 (and lifted 4x4) friendly. Give Dave my thanks for the recommendations on control arms.

[D-MASTER]

Yet another kudos for Astro! Thanks for the fast and thorough service guys. Nice to find a shop that's 4x4 (and lifted 4x4) friendly. Give Dave my thanks for the recommendations on control arms.

Any time Jim. Call us with any questions you may have.

Well not any questions...;)

[bige2533]

Would you PM me a quote for the same work but for a 1999 TJ with dana 30?

Can you guys PM me the cost to do a set of ball joints (all 4) parts and labor, for a dana 30 axle? XJ Jeep. Thanks

[Jerry]

Front end alignments are 56.50, four wheel alignments are 86.50 to do the four wheel with adjustable control arms is 126.50. let me know. jerry

[coaz4x4]

Howdy-

How much to install a SYE on a TJ?
This is the kit:
http://www.4x4groupbuy.com/store/advance-adapters-slip-yoke-eliminator-drive-shaft-p-115.html

Thanks!

[Jerry]

Around $350.00 let me know

[Jason]

What are you guys charging for a diagnosis. i've got some vibs on my 00 TJ and I need to know what I should do first.

[D-MASTER]

What are you guys charging for a diagnosis. i've got some vibs on my 00 TJ and I need to know what I should do first.

On something like that, it depends on how long we spend on the Jeep. We don't have a set price for checking it out. That said, i doubt that we would spend more than an hour in which we charge $85.

Depending on your "type" of vibes, you might want to start with tire balance and rotate. These usually take care of 80% of the vibes. Another 10% is in driveshafts. The last 5% is misc. stuff.

[xjmatt]

I've got an 01 honda Civic in need of a timing belt, drive belt and all other associated belts change. Also needs an alignment after driving the roads this winter. This up your alley?

If so please PM me a quote if it's something you can safely estimate. Thanks!

[D-MASTER]

I've got an 01 honda Civic in need of a timing belt, drive belt and all other associated belts change. Also needs an alignment after driving the roads this winter. This up your alley?

If so please PM me a quote if it's something you can safely estimate. Thanks!

PM sent your way...

[Tiffany]

D, Jerry.....

Need a quote on replacing rear brakes on the '00 Expy. Probably need rotors turned or replaced as well.

:crybaby:

[Jerry]

D, Jerry.....

Need a quote on replacing rear brakes on the '00 Expy. Probably need rotors turned or replaced as well.

:crybaby: Hey tiff, a rear brake job with rotors is 304.47+tax minus ten percent. without rotors 177.39+tax minus ten percent. let me know.

[72JEEPCJ5]

Can you re-wire a '72 CJ5 with a 360 eng? I picked up a harness some time ago but just can't find the time to get it done?

[D-MASTER]

Can you re-wire a '72 CJ5 with a 360 eng? I picked up a harness some time ago but just can't find the time to get it done?

That project is probably more than what we want to take on.
Thanks for asking though.

[4.0Cherokee]

i have a 88 xj that i need the front differential swaped out i got the differential sitting in back of my jeep also i have 2 inch spring spacers and 2 2inch rear shackles i would like installed when changing diff last but not least i got 1 rear leaf spring bolt i cant seem to get in if you could shout me a quote be most helpful , allmost forgot i also need extended brake lines installed in front
thanks
yesitsajeepthing@hotmail.com

[D-MASTER]

i have a 88 xj that i need the front differential swaped out i got the differential sitting in back of my jeep also i have 2 inch spring spacers and 2 2inch rear shackles i would like installed when changing diff last but not least i got 1 rear leaf spring bolt i cant seem to get in if you could shout me a quote be most helpful , allmost forgot i also need extended brake lines installed in front
thanks
yesitsajeepthing@hotmail.com

Email sent.

[Jeff Mason]

Hi guys. What would the cost be to install a Detroit EZ Locker in a Samurai third member (assuming we remove the third member and just bring it in, along with the already purchased locker).

I'll be out of the country for the next two weekends, so I am running out of time to do this myself...

PM me!

Jeff

[JTucker381]

Have you guys ever worked on 4x4 vans? In particular body or suspension lifts? I just bought a 1985 Ford 4x4 van and it's in Denver for the next month and am considering having some modifications done to it prior to driving it home.

[mines4x4]

Can you guys scan the chassis codes on a 2001 Chevy Impala? I think the tool is called a GM Tech2 Scanner or something compatible. I have an abs/traction error and I believe this will diagnose it. Any help or a point in the right direction is greatly appreciated.

Danny

[Jerry]

Yes we can. give us a call at 303-722-2808

[Jerry]

hello

[The Other Matt]

hey i have some wheel weights that keep gettin thrown off of my wheels

how much would you charge to balance my tires with some kind of sticky weights or somethin that wont fly off, not only is ity messing up my balance when they come off but they hit the inside of the fender and make an extremely loud popping sound ( wheel weight + 65mph = not good ) i dont want one flying off of the outside of the wheel, that could be dangerous

1993 Grand Cherokee Limited 5.2
3.5" Lift
31" Maxxis Bighorns
D-Window steelies

thanks

[jessasfella]

Joined colorado4x4 just to contact you...I heard good stuff about you on jeepforum.com.

I need some basic maintenance on my 2000 Jeep Wrangler...brakes, a belt, an oil change, maybe some other fluids. Do I need an appointment or can I just come in?

[Jerry]

It's best to make an appointment. give us a call 303-722-2808.

[D-MASTER]

hey i have some wheel weights that keep gettin thrown off of my wheels

how much would you charge to balance my tires with some kind of sticky weights or somethin that wont fly off, not only is ity messing up my balance when they come off but they hit the inside of the fender and make an extremely loud popping sound ( wheel weight + 65mph = not good ) i dont want one flying off of the outside of the wheel, that could be dangerous

1993 Grand Cherokee Limited 5.2
3.5" Lift
31" Maxxis Bighorns
D-Window steelies

thanks



We can certainly balance your tires with "stick on" weights. Just out of curiosity, are the weights coming off because of rocks or are they just not staying on because of the rim?

[The Other Matt]

We can certainly balance your tires with "stick on" weights. Just out of curiosity, are the weights coming off because of rocks or are they just not staying on because of the rim?

cause of the rim. they fly off while driving down the highway.]

i called and talked to ya guys yesterday. im gonna be calling back to make an appointment when i have the $$. i dont have any wobble right now so i figure i can wait a week or so

im not sure exactly what brand of rims but there 15" black steel D-Window rims. they have 31" maxxis Bighorn tires on them

[Jerry]

matt i'll see you tue.

[The Other Matt]

Went and got my tires balanced earlier today and will definately be coming back in the future when i need stuff done. Nice people, had a good time chattin while the work got done.

ill give ya guys a call when i get my 4.5" lift put on and need the ZJ aligned

[D-MASTER]

Went and got my tires balanced earlier today and will definately be coming back in the future when i need stuff done. Nice people, had a good time chattin while the work got done.

ill give ya guys a call when i get my 4.5" lift put on and need the ZJ aligned

Anytime...

[xjmatt]

Brought in my DD honda for some scheduled maintenance. Everything about working with the guys at Astro Auto was easy. Scheduling a day for the work, all work was done in a day, and it runs and idles as good as it did the day I got it. Piece of mind knowing the work was done right really is priceless when it's a vehicle you need to be 100% reliable.

Thanks guys. Wouldn't hesitate a second to recommend anybody your shop!

[D-MASTER]

Brought in my DD honda for some scheduled maintenance. Everything about working with the guys at Astro Auto was easy. Scheduling a day for the work, all work was done in a day, and it runs and idles as good as it did the day I got it. Piece of mind knowing the work was done right really is priceless when it's a vehicle you need to be 100% reliable.

Thanks guys. Wouldn't hesitate a second to recommend anybody your shop!

Glad to hear things are good. Always glad to help fellow wheelers...

[fpkites]

Do you guys do AC work? Need accumulator and hoses, or maybe even an evac before, vac and fill after I do the hard part :D

96 ZJ w/ 5.2l motor

[D-MASTER]

Do you guys do AC work? Need accumulator and hoses, or maybe even an evac before, vac and fill after I do the hard part :D

96 ZJ w/ 5.2l motor

We sure do. It is about that time of year to get the A/C working. Either way give us a call for an appointment. We can do the hard part or you can ;)

Call Brian @ 303-722-2808

[fpkites]

Nice job guys - your quote came in easily $100 less than the other shops I called. I'll be making an appointment soon for the whole kit and kaboodle.

[D-MASTER]

Nice job guys - your quote came in easily $100 less than the other shops I called. I'll be making an appointment soon for the whole kit and kaboodle.

We allways try to give good service at a reasonable price.

[cojk]

Do you guys do regearing? Have a 07 JK thinking about running 35's and wanted to get an idea how much to install new gears?

[The Other Matt]

how much to get my leaking tranny cooler lines replaced in my 93 ZJ 5.2L 46RH tranny

[AstroAuto]

how much to get my leaking tranny cooler lines replaced in my 93 ZJ 5.2L 46RH tranny

PM sent.

[team D.A.T.A.]

So, how much to have my front end looked at? I want to ensure the suspension geometry is correct and in good working order. Also, how much is an alignment? I have a TJ with 35's and a PSC tie rod? Thanks.

[D-MASTER]

So, how much to have my front end looked at? I want to ensure the suspension geometry is correct and in good working order. Also, how much is an alignment? I have a TJ with 35's and a PSC tie rod? Thanks.

A front end alignment is $56.50. $86.50 if you have adjustable control arms and/or adjustable track bar that needs adjusting. The front end check is part of an alignment.

[team D.A.T.A.]

A front end alignment is $56.50. $86.50 if you have adjustable control arms and/or adjustable track bar that needs adjusting. The front end check is part of an alignment.

Thank you. Book me Dano.

[FirecrackerKTM]

How much do you charge for engine diagnostics? I have a 95 YJ (OBD I). It's not showing any codes right now, but it runs like utter crap on and off and we've already replaced all the obvious bits and pieces.

[D-MASTER]

How much do you charge for engine diagnostics? I have a 95 YJ (OBD I). It's not showing any codes right now, but it runs like utter crap on and off and we've already replaced all the obvious bits and pieces.

It starts at $102.50. That includes pulling codes and computer diagnostics. After that, we then call you with whats wrong and how much that will cost.

[D-MASTER]

~~Bump~~

[bulldozer]

Thanks for the fast work, Astro. Quick diagnosis and fix!