PDA

View Full Version : Land Cruiser / Wrath Build/ KOH pre runner



never wheeled
November 9th, 2008, 10:34 AM
The origional thread has been closed for whatever reason. Progress has been slow but it's comming along still have some big items to finish it but I'm shooting for the first of the year.

Feul Cell (Has to be custom built we are shooting for 30 plus gallons ) Powder Coating
Paint
Wiring Harness
Spare tire
Spare wheel
Power steering reservoir New hoses and re size old ones
Rear brakes
Transmission
ECM
Cam
Fuel filters
Fuel sending unit
Seat Belts
Head rest
Springs
Shock tune
Dyno Mat Halon Fire suppression

It's on it's own weight and looks good
http://community.webshots.com/album/557693822cRyJtx?start=48

sgirt
November 9th, 2008, 04:33 PM
Looks very nice and VERY very low. Mine on the other hand is a bit too tall.

never wheeled
November 10th, 2008, 06:16 AM
Those pictures are at full bump. At ride height it will sit about 8" taller so droop and compression travel are about equal. About 18-19" under the belly at ride height.

Camp
November 10th, 2008, 06:47 AM
The origional thread has been closed for whatever reason. Progress has been slow but it's comming along still have some big items to finish it but I'm shooting for the first of the year.



The software closes threads that go dormant. I think the cut off is 30 days without a post. If you want to open a closed thread back up, let one of us know.

never wheeled
November 11th, 2008, 11:18 AM
Thanks Camp No big deal This is taking forever anyway...preech'n to the choir there.

Matt
November 11th, 2008, 11:42 AM
Is it done yet?

Camp
November 11th, 2008, 03:49 PM
Thanks Camp No big deal This is taking forever anyway...preech'n to the choir there.


Well, get on it. You'll feel bad if you only have a pit bike to ride and the Stupidru goes by you loaded down with gear, headed to the trails :flipoff2:

never wheeled
November 11th, 2008, 07:27 PM
not done yet ... Shooting for the first of the year got to have time to shake it down before KOH

never wheeled
January 23rd, 2009, 03:02 PM
OK the Wrath pre runner is complete and ready for powder coat. I just spent the last 7 days at Xtreme Engineering wit Nick and JT finishing it off. It came out awsome. I am very happy with the results. It is stripped down now and waiting for final welding and powder coating. The powder coat will be Translucent red which is a red layed over a chrome coat It looks like red anodizing. Then silver hood, roof and pannels and red graphics. I can't wait to go back Tuesday and re-assemble it.
http://community.webshots.com/album/566768857MfguVB?start=48
http://community.webshots.com/album/566768857MfguVB?start=36

DANGERRANGER
January 28th, 2009, 07:04 AM
damnnnnn that thing is sick

never wheeled
February 2nd, 2009, 10:05 AM
New pics of assembly
http://good-times.webshots.com/album/566768857MfguVB?start=48

never wheeled
April 17th, 2009, 09:53 AM
Well I think I said this would be done about a year or so ago but now it is Finally done minus limit straps.
The way it sits now
9" up travel in front
7 3/4" in the rear (Rear sits 1" lower than the front)
16" total travel front
21" total travel in the rear
20" clearance at ride height under the pan
75' at the B pillar
110" wheel base
Haven't weighed it yet but its going to be real close to 50/50 maybe even rear biased with the spare
The only short fall was the fuel capacity came up at 15 gallons a far cry from the origional goal of 30. On The other hand, It is a work of art Built by Campbell Ent. in Longmount these are the guys Shannon goes to when he's stumped...They're Fab Masters you may have seen their YJ in CRAWL.
I'll post pics with the skins and hood tonight

http://community.webshots.com/album/557693822cRyJtx?start=60

Sound_Man
April 17th, 2009, 01:05 PM
That is a killer rig!

Is the exhaust pointed at the upper control arm and brake line or is it just the angle of that pic?

never wheeled
April 17th, 2009, 11:38 PM
Actually it blows on the left rear tire to clean the dust off
With skins and hood and some detail pics
start here half way down the page
http://community.webshots.com/album/566768857MfguVB?start=120

jackrabbit
April 20th, 2009, 10:10 AM
http://im1.shutterfly.com/media/47b9da01b3127ccec6bc6a7edad500000040O00CZtmjVy3bsQe3nws/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/

http://im1.shutterfly.com/media/47b9da01b3127ccec6bd64167bc600000040O00CZtmjVy3bsQe3nws/cC/f%3D0/ps%3D50/r%3D0/rx%3D720/ry%3D480/

http://im1.shutterfly.com/media/47b9da01b3127ccec6bcef351b7400000040O00CZtmjVy3bsQe3nws/cC/f%3D0/ps%3D50/r%3D0/rx%3D720/ry%3D480/

http://im1.shutterfly.com/media/47b9da01b3127ccec6bd69a03bee00000040O00CZtmjVy3bsQe3nws/cC/f%3D0/ps%3D50/r%3D0/rx%3D720/ry%3D480/

http://im1.shutterfly.com/media/47b9da01b3127ccec6bdfb92baa500000040O00CZtmjVy3bsQe3nws/cC/f%3D0/ps%3D50/r%3D0/rx%3D720/ry%3D480/

http://im1.shutterfly.com/media/47b9da01b3127ccec6bce2d35b0c00000040O00CZtmjVy3bsQe3nws/cC/f%3D0/ps%3D50/r%3D0/rx%3D720/ry%3D480/

http://im1.shutterfly.com/media/47b9da01b3127ccec6bcf801dae300000040O00CZtmjVy3bsQe3nws/cC/f%3D0/ps%3D50/r%3D0/rx%3D720/ry%3D480/

cheftyler
April 20th, 2009, 11:40 AM
Very nice.