T&T Customs Toob FenderZ

[RockYacht]

Got a prototype set done this week for CJ models, these are full replacement bolt-on fenders, paint them and install them with common hand tools - no cutting / grinding / welding.

The test mule in the photos has our front shock hoops and brace installed. Production FenderZ will not have the cutouts for the hoop brace, unless requested.

We will be looking for another CJ to verify fitment on in the near future, as well as a couple of YJs to do prototype and fitment checks on. Stay tuned for your chance at some discounted parts, for being a T&T Customs (http://www.tntcustoms.com) tester.

Also looking for feedback on this design.

Thanks, Bob

http://colorado4x4.org/bobl/projects/toobfendrz1.jpg

http://colorado4x4.org/bobl/projects/toobfendrz2.jpg

http://colorado4x4.org/bobl/projects/toobfendrz3.jpg

http://colorado4x4.org/bobl/projects/toobfendrz4.jpg

http://colorado4x4.org/bobl/projects/toobfendrz6.jpg

[Grandpa Jeep]

Don't suppose you need a flat fender tester do ya?

[RockYacht]

In time yes. We will support ALL Jeep models...


Bob

[longboy]

looks great Bob! i've been mulling it over whether to do a flat fender on my CJ. looks like yours might be the kit to get-

[Pioneer]

Hey Bob you can use mine! :D I gotta get somethin done soon so I can get the full width axles put in and some 38's graemlins/bounce.gif I like the looks!!! Drop me a line when you know how much $$$$

[Sean Dogg]

Originally posted by RockYacht:
In time yes. We will support ALL Jeep models...


Bob In that case when will you have some tube fenders for my ZJ??? graemlins/rasta.gif You would definitly be the first in the market with that! Just kidding, looks like you do great work!

[RockcrawlingTJ a.k.a. Justin]

Nice work Bob, looks great. I'm sure someone will question the lack of an inner fenderwell protecting the engine from splatter (mud, water, etc).

Justin

[RockYacht]

Originally posted by Sean Dogg:
In that case when will you have some tube fenders for my ZJ??? graemlins/rasta.gif You would definitly be the first in the market with that! Just kidding, looks like you do great work! Ok I like a good challenge and all but... ;)


Bob

[Sprnklrmn]

What size tubing and guage of sheet? I like the idea of the short skirt inner fender, helps with cooling.

[BFJ93YJ]

Those fenders look really nice and beefy! I'd love to try out the YJ fenders for ya! I have a DD, so time would not be an issue.....

[SNOWMAN]

Originally posted by RockYacht:
In time yes. We will support ALL Jeep models...


Bob Right on man. That's cool. Most outfits would operate solely based on supply and demand. Looks like your re-writing the book right from the start.

graemlins/thumbsup.gif

[Eagle]

Awesome - looking good. Any price come to mind yet?

[dapozer]

pick me, pick me youu know that i should be the dead ringer for the 2nd proto fit. Being a scrambler owner and all. Oh yeah don't forget about project H2O fall this weekend graemlins/thefinger.gif Might have to bring the explorer.
s

[hert@Patriot4x4]

ya need a price, or I'll be happy to donate my TJ for some proto's; stickers can always come off :D

http://www.opoffroad.com/images/profiles/herter.jpg

[RockYacht]

Thanks for the interest, keep it coming.

No price yet, I need to build a few pair to see what it actually takes once we get the process down the price will follow...


Bob

[ April 20, 2004, 03:41 PM: Message edited by: RockYacht ]

[rblacktj]

I want those on my TJ...

[350TJ]

Hey RockYacht, best design I've seen. I'd be happy to supply a test TJ for those if you need one. I can drag the rig up there and let you have it as long as it takes. PM me if interested:
http://images.cardomain.com/member_images/1/web/289000-289999/289024_35_full.jpg

[ May 07, 2004, 03:01 PM: Message edited by: 350TJ ]

[Big Country]

They look great Bob :D

Your attention to detail is awesome, the jeep is going to be sweet when finished. Very nice work graemlins/bounce4.gif

350TJ - Nice rig

Currently in Iraq

[ May 20, 2004, 08:19 PM: Message edited by: Big Country ]

[Suave]

RockYacht, Big Country the Tube fenders look awesome, I look forward to seeing them first hand and maybe add a pair to the TJ.

[Bryan]

Post up when you work out a price. I'm interested! Got any TJ prototypes built yet?

[blackyj]

Ill throw in for Yj prototype

95 yj on 35ssr

[Snake]

I'll let you play with my CJ-5. Looks great, PM me if interested

[RockYacht]

Sorry for no responses lately, we've been really busy and out of town.

This week we will be finishing up all the details for the CJ FenderZ and should be ready to take orders by next week. Please bear with us as we get this going.

YJ FenderZ will be next and then we will tackle the TJs. Note to all you TJ guys the TJ version will be a bolt on, as far as the fender goes, but you're on your own for all the stuff that bolts to the fenders... In other words read the fine print, "some modification required for proper installation"

Bob

[Jefe]

Let me know if you want a TJ project rig, I will be more than happy to volunteer mine.

[Wally]

Keep me posted on the YJ ones, i'd be interested and could even loan ya my YJ for a week or two for test fitting if necessary, pics are in my sig


Thanks,


Wally

[RockYacht]

UPDATE: CJ FenderZ are ready to go. I've got 4 pair all mocked up, just need finish welding and some clean up work. Pics/Prices will be up soon.

With that said, we are about 2 weeks out from needing a YJ or 2. Wallysheata, BFJ93YJ and blackyj you have mail.

Folks in the TJ crowd hang in there, you are next up after the YJ prototype work.

UPDATE II: Final price on the CJ FenderZ will be $395.00 per pair unpainted + shipping. Our site will be updated soon... YJ FenderZ will be priced the same. I am currently in need of 2 beta testers for our CJ Fenderz, Longboy, Pioneer and Sprnklrmn you have mail.

Thanks for your patience, Bob

[RockYacht]

The CJ Beta Testers are all in place, thank you to those that responded to help us out and get our products out on the trail. Keep your eyes open for Sprnklrmn and Da Pozer from CO4X4, Mikey from Denver and Jason from CO Springs.

Still looking for YJ Beta Testers, we need 4. Send PM for details.


Bob

[stodzz]

I am looking for fenders on the blue one!
http://www.imagestation.com/picture/sraid120/pda5b3d7523386d77341a0f3743790846/f86b7c5b.jpg

[hert@Patriot4x4]

Folks in the TJ crowd hang in there, you are next up after the YJ prototype work.

hanging...... :D

[Paul93XJ]

Look's great. You need a J Truck tester :)

[RockYacht]

Look's great. You need a J Truck tester :)

J truck? Not really a market for that; however, we do like to do one off custom stuff. PM if you're interested.


Bob

[Peanut]

TJ still hanging......

[zachv]

Bob, nice work. :cool:

Longboy told me to check out your work since you are doing his cage. I know exactly what you mean about the TJ tube fenders. After looking at a TJs front fenders I saw why PSC decided to do what they do. The TJ fenders have a LOT of stuff attached to them and the fenders have a bunch of structural integrity to them, unlike the CJ/YJ ones. I have done two sets of the TJ ones so far and it is much easier and stronger to leave the inner fender in place.

Anyway, keep up the great work!

[RockYacht]

Thanks, what's a guy from Jersey doing way out here? ;)

I've been doing some home work on the TJ FenderZ, a full bolt-on replacement is comng soon. :evil:

[tom.keyes]

Bob, Nice work. Do you happen to know Dennis Chaffin? He owns a Lime Green 7 and a white 81 Scrambler and lives in Cheyenne. I think he does some side stuff for Warn. Nice guy and is in your neighborhood.

TK

[RockYacht]

Yes I know of Dennis and have met him once.

Bob

[ProfessorRex]

Bob,
When you want a TJ prototype drop me a PM, I'd like to get a set of full length comp cut cornerz at the same time.

-Rex

Here's a link to a picture (Can we not put pics in posts with the new board?)
http://www.msnusers.com/PhatJeepsOffroadPJO/springbreak2004.msnw?action=ShowPhoto&PhotoID=388

[zachv]

Thanks, what's a guy from Jersey doing way out here? ;)


It looks like we are going to be neighbors in the near future. I am coming out in September and will be searching for a new habitat. I have realized that the burning in my soul to live in Colorado cannot be quenched. :D

Bob, do you do this full-time or is it a side business? Maybe I could run up there one day while we are out to meet you?

BTW, I can't wait to see the fenderZ :cool:

[RockYacht]

Here's a teaser shot :D

[BIGROCKYCO]

Yeah I got a 93YJ that you can do what ever you want with. Its got 35's with 5 1/2" of lift.
http://f1.pg.photos.yahoo.com/ph/jeepen_ty93/detail?.dir=/Yahoo!+Photo+Album&.dnm=P4130090.jpg

[PhantomD AKA Zach]

I have an 89Yj, Black on 33's. Not that big, but if you need another YJ I would be happy to let mine go for awile :D.

If ya pick me i would buy some sliderz as well)

I have some pics of it, but it has been waxed now and looks much better...
http://home.earthlink.net/~phantomdragonz/Jeep/zachposerflex.jpg

Zach

[RockYacht]

Got some Pics this morning from Sprnklrmn, by the grin I would say he likes em. :D

[Jeep-in-dna]

Hey Bob, here is a pic of mine as it stands right now. But within the next month or two I will be mounting my 9" and 44 under it, 2 1/2" springs SOA on 36" swampers. But before it goes under the knife it I will be throwing on a custom paint job. And just to add that it is much easier to work on a vehicle that is a little closer to the ground than it is to get accurate messurments on a monster sized vehicle ;) .

http://www.imagestation.com/mypictures/inbox/view.html?id=4151589336&url=http%3A//www.imagestation.com/picture/sraid134/p31efde5eff028ed8c6f09f12ba210f16/f77439d8.jpg&caption=matt's%20jeep2&album_id=4285930885&from_album=1


http://www.imagestation.com/mypictures/inbox/view.html?id=4151589334&url=http%3A//www.imagestation.com/picture/sraid134/p7b9990f885683df59b8583ef1f2ae4d3/f77439d6.jpg&caption=matt's%20jeep1&album_id=4285930885&from_album=1

Very nice work on those fenderz
cheers :beer:

I will also be purchasing sliderz from you.

[RockYacht]

Do to some scheduling conflicts we will be proofing the YJ FenderZ concept right after Labor Day then move into beta testing, please stay tuned.


Bob

[Jeep-in-dna]

Hey right in time for my B-day. ;) wink wink

[RockYacht]

OK all got the TJ FEnderZ concept vehicle out of the shop. Keep your eyes open for WrathOfRubicon if you'd like to check them out in person. Keep in mind this was the concept vehicle, production pieces will vary slightly. The next phase of the project is to move forward with a prototype, then on to beta testing, stay tuned as we will need volunteers from Co4X4 for the next phases. We will let you know as soon as we are ready to move forward. Thanks for your interest and patience.

Bob

[zachv]

Bob, very nice work, as I see is the norm for you. Did you replace the whole fender, or cut part of the stock one out to let the new pieces fit?

:thumbsup:

[RockYacht]

Thanks Zach, we don't believe in the hack and whack approach...

Our FenderZ are a complete bolt-on replacement - including new inner fenderwells and mounts for all the accessories. Yes it's more difficult, but we believe it's the only solution so as to not compramize the structural intergrity of the fender and it's the only way to make a fender that will stand up to some serious use.

Bob

[WrathOfRubicon]

The setup really has to be seen in person, to gauge the full affect and improvement of what Bob does on these fenders. The "WrathofCon" will be appearing at an M&G and/or the meanest trails out there, near you very soon!!! lol

Really thanks again Bob, this is totally a 1st rate product and installation job you have done here on my Rubi.


John S.

[ProfessorRex]

Bob,
Need another TJ tester? I'd like to get a set of your full length comp-cut cornerZ at the same time.

Let me know,
Rex

[hert@Patriot4x4]

Still willing to donate mine for some protos :D

http://opoffroad.com/images/ouraction/bcanyonaug04_23.jpg

[HIGHTIMES]

How about a candidate for cages :rolleyes: Are you guts going to make cages? or do you already, I have the a jeep that would be happy to help out :D
http://www.colorado4x4.org/vbb/image.php?u=460&type=profile&dateline=1090087765
Or what ever else you need to toy with making

[RockYacht]

Yes we do CageZ as well. Please be patient as we will be bringing out a new line of TJ cage parts in Oct.

Bob

[hert@Patriot4x4]

any more progress on the TJ fenders?

[RockYacht]

Not at this time, sorry. We are way backed up with project vehicles. We'll get back on schedule mid Sept with the YJ set up, then tackle the TJ's after that.

Thanks for your patience.

Bob

[hert@Patriot4x4]

kewl :beer:

[cojeepster]

Would love to be a sponsor for your tube fenders. I own Rex Ashtons old jeep and have change about everything. I am looking for a strong front fender with inner fender attached and I sure like your CJ prototype. MIne is a lime green color with 37 and chormalussion rollcage. Pictures are in my signature...

[350TJ]

Not at this time, sorry. We are way backed up with project vehicles. We'll get back on schedule mid Sept with the YJ set up, then tackle the TJ's after that.

Thanks for your patience.

Bob

Bob, if ya have time, take some pics of the project rigs. I'd like to see what ya got goin' there. You're first on my list for the "big" project.

[Mud_Bird]

any way to do something for a two door xj. i dont know what it would be but thats why you are the fab...

[RockYacht]

We have an XJ test mule in the fleet now, standby for cool stuff for the "other" Jeep shortly. ;) Not sure about tube FenderZ though, hmmmmmm


Bob

[pinoyjeeper]

any plans to design the TJ fender with a little bit of flare to catch the mud and small rocks??? Let me know if you need a tester as well.

[RockYacht]

:evil:

http://colorado4x4.org/bobl/DSC01202.JPG

ssshhhh it's a secret. ;)


Bob

[PhantomD AKA Zach]

THAT is freeking sweet!!! I did not think fender flares could be done on a tube fender and not look retarded.... coughPoison spidercough.

Now I THINK I AM JEALOUS :D

Zach

[350TJ]

That TJ fender with flair is a VERY fine piece of work. As a mater of fact, I might just frame that pic and hang it up in the bedroom LOL! Seriously, these FenderZ are light years ahead of anything out there! Thanks for the great work Bob!

[jeepinaround]

Bob I am in the market for some fenders for a YJ. I was trying to see something on the website but it seems to be all screwed up.

[acejeeper]

Let me know when the TJ fenders with the flares are ready. I want some!!!

[JeeperJohn]

do u think you will need a 97 tj tester just let me know

[PhantomD AKA Zach]

Bob I am in the market for some fenders for a YJ. I was trying to see something on the website but it seems to be all screwed up.

I get the website all screwed up as well...

but about the fenders, I have a set and I love them, I am not sure he is doing them anymore ir if they are just an in-house thing now... give him a call and I bet he won't turn you down...


just so you all realize this, CHECK THE DATE! this thread is from last year!

Zach

[jeepinaround]

Yeah I know the date was from last year. I had been following the thread for awhile waiting to see some results. I got on the website and noticed it was all screwed up so I posted here.

[TJ_Shunk]

I too have his front and rear (the only set so far) Toob FenderZ with Flares. All I can say is that I love them!! They are stout and they look great as well as keeping some of the rocks off the tub. I will let the pictures speak for themself.

http://www.colorado4x4.org/gallery/files/4/7/8/6/rearunmounted.JPG
http://www.colorado4x4.org/gallery/files/4/7/8/6/ToobFenderZ4.JPG
http://www.colorado4x4.org/gallery/files/4/7/8/6/ToobFenderZ3.JPG
http://www.colorado4x4.org/gallery/files/4/7/8/6/ToobFenderZ2.JPG
http://www.colorado4x4.org/gallery/files/4/7/8/6/ToobFenderZ1.JPG

Just call Bob and ask if he will do them for you. It will require you to bring your Heep to his shop.

-Matt

[jtw2]

You can use my YJ for fenders as well. It's got a full width dana 44 in the front so I'll be needing something to go to larger tires soon. I'm up in Windsor (Ft. Collins) so it's a short drive up to you.

It's red and very photogenic too!

ETA: D'oh! I just saw this was from last year!

[pitbull]

we have a Rat box 92 YJ also...

[pitbull]

crapo I just noticed the date too..

[pdrhound]

it would be nice to have a camp cut rear for the cj. in case it gets stretched. with the flair for pansie like me

[bfg35yj]

I'm surprised Bob has not chimed in?

It look's to me like he?s put his focus on XJ's????


I have the whole YJ TnT line.. ( Tube Fenders, Rockers, Rear Comp cut fenders) They work really well and look sweet? I?m not sure and Bob can clear this up but I think he is only going to do Cj,Yj & Tj on a custom only base?.. There is a lot of work that is needed just to put the tube fenders and making everything fit right?. Plus he can cut things on a CNC and that make all the difference in how they come out? Very clean?

If anyone has any question or would like to check them out just let me know?

[TJ_Shunk]

I?m not sure and Bob can clear this up but I think he is only going to do Cj,Yj & Tj on a custom only basis


X2

[jtw2]

X2
X3
I'm looking to do something like this soon.

[RockYacht]

I'm surprised Bob has not chimed in?

It look's to me like he?s put his focus on XJ's????

Been busy fellas. Yes we have been focused on the XJ thing lately, but not solely. Details on this subject and many more coming soon.

Bob

[lilgreenjeepyj]

If you need another YJ, Im game...

Saw the TJ_Shunk's Rig last weekend, I have to say you do nice work.

[yellowXJ2k1]

Where are the XJ FenderZ??? :D